Style DCMT to RPG Inserts
Style DCMT
- Chipbreaker type CM-medium
- Screw-on style insert
- 7° Relief angle
- 55° Diamond with chipbreaker
- Single sided insert with molded chipbreaker
- For semi-finishing and finishing cuts
- Feed range .003 To .012 IPR/0.1-0.3 MM/REV
| Insert Style | ISO Designation | I.C. | Width | Corner Radius | Thru Hole | C520 EDP# | C550 EDP# | CM02 EDP# | CM14 EDP# | X-Treme EDP# |
|---|---|---|---|---|---|---|---|---|---|---|
| DCMT 21.51 | DCMT 070204 | 1/4 | 3/32 | 1/64 | 0.110 | 40436 | 40440 | 40442 | 40444 | - |
| DCMT 21.52 | DCMT 070208 | 1/4 | 3/32 | 1/32 | 0.110 | 40448 | 40452 | 40454 | 40456 | 40455 |
| DCMT 32.51 | DCMT 11T304 | 3/8 | 5/32 | 1/64 | 0.173 | 40460 | 40464 | 40466 | 40468 | - |
| DCMT 32.52 | DCMT 11T308 | 3/8 | 5/32 | 1/32 | 0.173 | 40472 | 40476 | 40478 | 40480 | 40477 |
| DCMT 431 | DCMT 150404 | 1/2 | 3/16 | 1/64 | 0.203 | 40467 | 40469 | 40470 | 40471 | - |
| DCMT 432 | DCMT 150408 | 1/2 | 3/16 | 1/32 | 0.203 | 40479 | 40481 | 40482 | 40483 | - |
Style DNMG
- Combo pin and clamp insert
- 0° Relief angle
- 55° Diamond with chipbreaker
- Double sided for medium to heavy cuts
- Used in a wide range of materials and applications
| Insert Style | ISO Designation | I.C. | Width | Corner Radius | Thru Hole | C520 EDP# | C550 EDP# | CM02 EDP# | CM14 EDP# | X-Treme EDP# |
|---|---|---|---|---|---|---|---|---|---|---|
| DNMG 331 | DNMG 16 04 04 | 3/8 | 3/16 | 1/64 | 0.150 | 40497 | - | 40498 | - | - |
| DNMG 431 | DNMG 15 04 04 | 1/2 | 3/16 | 1/64 | 0.203 | 40484 | 40488 | 40490 | 40492 | 40495 |
| DNMG 432 | DNMG 15 04 08 | 1/2 | 3/16 | 1/32 | 0.203 | 40496 | 40500 | 40502 | 40504 | 40505 |
| DNMG 433 | DNMG 15 04 12 | 1/2 | 3/16 | 3/64 | 0.203 | 40508 | 40512 | 40510 | 40516 | 40517 |
| DNMG 441 | DNMG 15 06 04 | 1/2 | 1/4 | 1/64 | 0.203 | - | - | - | 40518 | - |
| DNMG 442 | DNMG 15 06 08 | 1/2 | 1/4 | 1/32 | 0.203 | - | - | - | 40519 | - |
| DNMG 542 | DNMG 19 06 08 | 5/8 | 1/4 | 1/32 | 0.250 | 40520 | 40524 | 40526 | 40528 | 40527 |
| DNMG 543 | DNMG 19 06 12 | 5/8 | 1/4 | 3/64 | 0.250 | 40532 | 40536 | 40538 | 40540 | - |
Style DNMP
- Screw-on style insert
- 55° Relief angle diamond
- 5° Positive cutting action for semi-finishing and finishing
- Low cutting force for machining soft materials, alloys, and stainless steel
- Feed range 0.2-0.5MM/MIN
| Insert Style | ISO Designation | I.C. | Width | Corner Radius | Thru Hole | C520 EDP# | C550 EDP# | CM14 EDP# |
|---|---|---|---|---|---|---|---|---|
| DNMP 431 | DNMP 15 04 04 | 1/2 | 3/16 | 1/64 | 0.203 | 44690 | 44692 | 44696 |
| DNMP 432 | DNMP 15 04 08 | 1/2 | 3/16 | 1/32 | 0.203 | 44698 | 44700 | 44704 |
Style KNUX
- 55° Parallelogram
- Clamp on insert
- 0° Relief angle
- 12° Positive cutting action
| Insert Style | I.C. | Width | Corner Radius | C520 EDP# | C550 EDP# | CM14 EDP# |
|---|---|---|---|---|---|---|
| Right Hand | ||||||
| KNUX 160405 R11 | .188 | .020 | .086 X 12° | 44418 | 70560 | 44420 |
| KNUX 160410 R11 | .188 | .040 | .086 X 12° | - | 70576 | 44424 |
| Left Hand | ||||||
| KNUX 160405 L11 | .188 | .020 | .086 X 12° | 44427 | 70572 | 44428 |
| KNUX 160410 L11 | .188 | .040 | .086 X 12° | 44423 | 70564 | 44432 |
Style RNG Round Clamp-On Insert
| Insert Style | ISO Designation | I.C. | Width | C520 EDP# | C550 EDP# | CM14 EDP# | X-Treme EDP# |
|---|---|---|---|---|---|---|---|
| RNG 32 | RNGN 09 03 00 | 3/8 | 1/8 | 44826 | 44828 | 44832 | - |
| RNG 42 | RNGN 12 03 00 | 1/2 | 1/8 | 44834 | 44836 | 44840 | 44841 |
| RNG 43 | RNGN 12 04 00 | 1/2 | 3/16 | 44842 | 44844 | 44848 | - |
| RNG 63 | RNGN 19 04 00 | 3/4 | 3/4 | 44850 | 44852 | 44856 | - |
Style RCMT
| Insert Style | ISO Designation | I.C. | Width | Thru Hole | C520 EDP# | C550 EDP# | CM14 EDP# | X-Treme EDP# |
|---|---|---|---|---|---|---|---|---|
| RCMT 325 | RCMT 32.50 | 3/8 | 5/32 | 0.173 | 44972 | 44976 | 44980 | 44981 |
Style RNMA
- For turning and facing
- 0° Relief angle
| Insert Style | ISO Designation | I.C. | Width | Thru Hole | C520 EDP# | C550 EDP# | CM14 EDP# |
|---|---|---|---|---|---|---|---|
| RNMA 32 | RNMA 09 03 00 | 3/8 | 1/8 | 0.150 | 44794 | 44796 | 44800 |
| RNMA 43 | RNMA 12 04 00 | 1/2 | 3/16 | 0.203 | 44802 | 44804 | 44808 |
| RNMA 54 | RNMA 15 06 00 | 5/8 | 1/4 | 0.250 | 44810 | 44812 | 44816 |
| RNMA 64 | RNMA 19 06 00 | 3/4 | 3/16 | 0.313 | 44818 | 44820 | 44824 |
| RNMA 84 | RNMA 2506 00 | 1" | 1/4 | 0.359 | 44821 | 44825 | 44822 |
| RNMA 86 | RNMA 2509 00 | 1" | 3/8 | 0.359 | 44817 | 44819 | 44823 |
Style RNMG
- For turning and facing
- 0° Relief angle
- Round clamp-on insert
| Insert Style | ISO Designation | I.C. | Width | Thru Hole | C520 EDP# | C550 EDP# | CM14 EDP# | X-Treme EDP# |
|---|---|---|---|---|---|---|---|---|
| RNMG 32 | RNMG 09 03 00 | 3/8 | 1/8 | 0.150 | 44858 | 44860 | 44864 | - |
| RNMG 43 | RNMG 12 04 00 | 1/2 | 3/16 | 0.203 | 44866 | 44868 | 44872 | 44873 |
| RNMG 54 | RNMG 15 06 00 | 5/8 | 1/4 | 0.250 | 44874 | 44876 | 44880 | - |
| RNMG 64 | RNMG 19 06 00 | 3/4 | 1/4 | 0.312 | 44882 | 44884 | 44888 | - |
| RNMG 84 | RNMG 2506 00 | 1" | 1/4 | 0.359 | 44881 | 44883 | 44885 | - |
| RNMG 86 | RNMG 2509 00 | 1" | 3/8 | 0.359 | 44886 | 44887 | 44889 | - |
Style RPG
- For turning and facing
- 11° Relief angle
- Round clamp-on insert
| Insert Style | ISO Designation | I.C. | Width | C520 EDP# | C550 EDP# | CM14 EDP# |
|---|---|---|---|---|---|---|
| RPG 32 | RPGN 09 03 00 | 3/8 | 1/8 | 44890 | 44892 | 44896 |
| RPG 42 | RPGN 12 03 00 | 1/2 | 1/8 | 44898 | 44900 | 44904 |
| RPG 43 | RPGN 12 04 00 | 1/2 | 3/16 | 44906 | 44908 | 44912 |
| RPG 54 | RPGN 15 06 00 | 5/8 | 1/4 | 44899 | 44901 | 44905 |
| RPG 64 | RPGN 19 06 00 | 3/4 | 1/4 | 44907 | 44909 | 44910 |