APKT 1003 PDR-HM CM02 Tracker

Style APKT • 85 Deg Parallelogram Milling Insert • For Light Cutting of Steel and Cast Iron at Elevated Speeds

APKT 1604 PDR-HM CM02 Tracker

Style APKT • 85 Deg Parallelogram Milling Insert • For Light Cutting of Steel and Cast Iron at Elevated Speeds

APKT1505 PDR-HM CM02 Tracker

Style APKT • 85 Deg Parallelogram Milling Insert • For Light Cutting of Steel and Cast Iron at Elevated Speeds

CCGT 21.51 CM02 Tracker

Style CCGT • Screw-On Style Insert • Used for semi-finishing and finishing on a wide range of materials • Chipbreaker for shallow depths of cuts and low feed rates

CCGT 21.52 CM02 Tracker

Style CCGT • Screw-On Style Insert • Used for semi-finishing and finishing on a wide range of materials • Chipbreaker for shallow depths of cuts and low feed rates

CCGT 32.50 CM02 Tracker

Style CCGT • Screw-On Style Insert • Used for semi-finishing and finishing on a wide range of materials • Chipbreaker for shallow depths of cuts and low feed rates

CCGT 32.52 CM02 Tracker

Style CCGT • Screw-On Style Insert • Used for semi-finishing and finishing on a wide range of materials • Chipbreaker for shallow depths of cuts and low feed rates

CCGT 431 CM02 Tracker

Style CCGT • Screw-On Style Insert • Used for semi-finishing and finishing on a wide range of materials • Chipbreaker for shallow depths of cuts and low feed rates

CCGT 432 CM02 Tracker

Style CCGT • Screw-On Style Insert • Used for semi-finishing and finishing on a wide range of materials • Chipbreaker for shallow depths of cuts and low feed rates

CCMT 21.50.5 CM02 Tracker

Style CCMT • Screw-On Style Insert • Used for semi-finishing and finishing on a wide range of materials • 80° Diamond Single Sided insert with molded chipbreaker

CCMT 21.51 CM02 Tracker

CCMT 21.51 CM02 Tracker

CCMT 21.52 CM02 Tracker

Style CCMT • Screw-On Style Insert • Used for semi-finishing and finishing on a wide range of materials • 80° Diamond Single Sided insert with molded chipbreaker

CCMT 32.50 CM02 Tracker

Style CCMT • Screw-On Style Insert • Used for semi-finishing and finishing on a wide range of materials • 80° Diamond Single Sided insert with molded chipbreaker

CCMT 32.51 CM02 Tracker

CCMT 32.51 CM02 Tracker

CCMT 32.52 CM02 Tracker

CCMT 32.52 CM02 Tracker

CCMT 431 CM02 Tracker

Style CCMT • Screw-On Style Insert • Used for semi-finishing and finishing on a wide range of materials • 80° Diamond Single Sided insert with molded chipbreaker

0