Style CNMG • Can be used for roughing, semi-finishing and finishing • Proportionate to the size and the nose radius of the insert • Combo Pin and Clamp Insert • 0º Relief Angle • Double Sided used for medium to heavy cuts • 80º Diamond with chipbreaker • Feed Range .007 to .028 IPR
Style CNMG • Can be used for roughing, semi-finishing and finishing • Proportionate to the size and the nose radius of the insert • Combo Pin and Clamp Insert • 0º Relief Angle • Double Sided used for medium to heavy cuts • 80º Diamond with chipbreaker • Feed Range .007 to .028 IPR
SPC-42 ER C-6 Carbide Insert
Style TPGH • Screw-On style insert • Triangle with Chipbreaker • Single sided insert with chipbreaker • 11º Relief Angle • Suitable for turning facing and boring • Feed range .005 to .015 IPR / 0.1-0.4 mm/rev
Style TPMR • Chipbreaker Type • 11º Relief Angle • Clamp Insert • Single sided insert with chipbreaker • Use for semi finish cuts where chip control is required
Style TPU • Clamp Style Insert • 11º Relief Angle • Triangle Ground Top and Bottom • Single sided without chipbreaker • Used for difficult to cut materials