CCGT 21.51 AlTIN Tracker

Style CCGT • Screw-On Style Insert • Used for semi-finishing and finishing on a wide range of materials • Chipbreaker for shallow depths of cuts and low feed rates

CCMT 21.51 TiALN Tracker

Style CCMT • Screw-On Style Insert • Used for semi-finishing and finishing on a wide range of materials • 80° Diamond Single Sided insert with molded chipbreaker

CCMT 431 TiALN Tracker

Style CCMT • Screw-On Style Insert • Used for semi-finishing and finishing on a wide range of materials • 80° Diamond Single Sided insert with molded chipbreaker

CNMG 321 TiAlN Carbide Inserts

Style CNMG • Can be used for roughing, semi-finishing and finishing • Proportionate to the size and the nose radius of the insert • Combo Pin and Clamp Insert • 0º Relief Angle • Double Sided used for medium to heavy cuts • 80º Diamond with chipbreaker • Feed Range .007 to .028 IPR

CNMG 432 C-2 TiALN Tracker

Style CNMG • Can be used for roughing, semi-finishing and finishing • Proportionate to the size and the nose radius of the insert • Combo Pin and Clamp Insert • 0º Relief Angle • Double Sided used for medium to heavy cuts • 80º Diamond with chipbreaker • Feed Range .007 to .028 IPR

CNMG 433 TiAlN Carbide Insert

Style CNMG • Can be used for roughing, semi-finishing and finishing • Proportionate to the size and the nose radius of the insert • Combo Pin and Clamp Insert • 0º Relief Angle • Double Sided used for medium to heavy cuts • 80º Diamond with chipbreaker • Feed Range .007 to .028 IPR

CPMT 21.51 ALTIN Tracker

Style CPMT • ChipBreaker Type CF-Finishing • 11° Relief Angle • Screw-On Style Inserts • 80° Diamond with Chipbreaker • Single Sided insert with molded chip breaker • Used for turning and finishing on a wide range of materials • Feed range .005 to .015 IPR / 0.1-0.4 mm/rev

DCMT 21.51 TiALN Tracker

Style DCMT • ChipBreaker Type CM-Medium - Screw-On style insert • 7° Relief Angle - 55° Diamond with Chipbreaker • Single Sided insert With molded chipbreaker. • For semi-finishing and finishing cuts • Feed range .003 to .012 IPR / 0.1-0.3 mm/rev

DCMT 21.52 TiALN Tracker

Style DCMT • ChipBreaker Type CM-Medium - Screw-On style insert • 7° Relief Angle - 55° Diamond with Chipbreaker • Single Sided insert With molded chipbreaker. • For semi-finishing and finishing cuts • Feed range .003 to .012 IPR / 0.1-0.3 mm/rev

DCMT 32.51 TiALN Cobra Carbide

Style DCMT • ChipBreaker Type CM-Medium - Screw-On style insert • 7° Relief Angle - 55° Diamond with Chipbreaker • Single Sided insert With molded chipbreaker. • For semi-finishing and finishing cuts • Feed range .003 to .012 IPR / 0.1-0.3 mm/rev

DCMT 32.52 TiALN Tracker

Style DCMT • ChipBreaker Type CM-Medium - Screw-On style insert • 7° Relief Angle - 55° Diamond with Chipbreaker • Single Sided insert With molded chipbreaker. • For semi-finishing and finishing cuts • Feed range .003 to .012 IPR / 0.1-0.3 mm/rev

DNMG 331 TiAlN Carbide Inserts

Style DNMG • Combo Pin and Clamp Insert • 0° Relief Angle • 55º Diamond with Chipbreaker • Double sided used for medium to heavy cuts • Used in a wide range of materials and applications

GTN-3 TiALN Tracker Cut-Off

Style GTN

GTN-4 TiALN Tracker Cut-Off

Style GTN

NG 3047R TiAlN Tracker

Style NG - Right Hand

NG 3094R TiAlN

Style NG - Right Hand

0